<!DOCTYPE qgis PUBLIC 'http://mrcc.com/qgis.dtd' 'SYSTEM'>
<qgis simplifyMaxScale="1" simplifyDrawingHints="1" labelsEnabled="0" hasScaleBasedVisibilityFlag="0" readOnly="0" minScale="100000000" simplifyDrawingTol="1" simplifyAlgorithm="0" styleCategories="AllStyleCategories" simplifyLocal="1" symbologyReferenceScale="-1" version="3.36.2-Maidenhead" maxScale="0">
  <flags>
    <Identifiable>1</Identifiable>
    <Removable>1</Removable>
    <Searchable>1</Searchable>
    <Private>0</Private>
  </flags>
  <temporal mode="0" accumulate="0" endField="" fixedDuration="0" startField="" limitMode="0" startExpression="" enabled="0" endExpression="" durationField="fid" durationUnit="min">
    <fixedRange>
      <start></start>
      <end></end>
    </fixedRange>
  </temporal>
  <elevation extrusionEnabled="0" zscale="1" clamping="Relative" respectLayerSymbol="1" showMarkerSymbolInSurfacePlots="0" symbology="Line" zoffset="0" extrusion="0" type="IndividualFeatures" binding="Centroid">
    <data-defined-properties>
      <Option type="Map">
        <Option value="" type="QString" name="name"/>
        <Option name="properties"/>
        <Option value="collection" type="QString" name="type"/>
      </Option>
    </data-defined-properties>
    <profileLineSymbol>
      <symbol force_rhr="0" alpha="1" type="line" clip_to_extent="1" frame_rate="10" name="" is_animated="0">
        <data_defined_properties>
          <Option type="Map">
            <Option value="" type="QString" name="name"/>
            <Option name="properties"/>
            <Option value="collection" type="QString" name="type"/>
          </Option>
        </data_defined_properties>
        <layer id="{f784289f-6c22-494e-a866-dfbf2b8a388a}" class="SimpleLine" pass="0" locked="0" enabled="1">
          <Option type="Map">
            <Option value="0" type="QString" name="align_dash_pattern"/>
            <Option value="square" type="QString" name="capstyle"/>
            <Option value="5;2" type="QString" name="customdash"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="customdash_map_unit_scale"/>
            <Option value="MM" type="QString" name="customdash_unit"/>
            <Option value="0" type="QString" name="dash_pattern_offset"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="dash_pattern_offset_map_unit_scale"/>
            <Option value="MM" type="QString" name="dash_pattern_offset_unit"/>
            <Option value="0" type="QString" name="draw_inside_polygon"/>
            <Option value="bevel" type="QString" name="joinstyle"/>
            <Option value="255,158,23,255,rgb:1,0.61960784313725492,0.09019607843137255,1" type="QString" name="line_color"/>
            <Option value="solid" type="QString" name="line_style"/>
            <Option value="0.6" type="QString" name="line_width"/>
            <Option value="MM" type="QString" name="line_width_unit"/>
            <Option value="0" type="QString" name="offset"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="offset_map_unit_scale"/>
            <Option value="MM" type="QString" name="offset_unit"/>
            <Option value="0" type="QString" name="ring_filter"/>
            <Option value="0" type="QString" name="trim_distance_end"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="trim_distance_end_map_unit_scale"/>
            <Option value="MM" type="QString" name="trim_distance_end_unit"/>
            <Option value="0" type="QString" name="trim_distance_start"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="trim_distance_start_map_unit_scale"/>
            <Option value="MM" type="QString" name="trim_distance_start_unit"/>
            <Option value="0" type="QString" name="tweak_dash_pattern_on_corners"/>
            <Option value="0" type="QString" name="use_custom_dash"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="width_map_unit_scale"/>
          </Option>
          <data_defined_properties>
            <Option type="Map">
              <Option value="" type="QString" name="name"/>
              <Option name="properties"/>
              <Option value="collection" type="QString" name="type"/>
            </Option>
          </data_defined_properties>
        </layer>
      </symbol>
    </profileLineSymbol>
    <profileFillSymbol>
      <symbol force_rhr="0" alpha="1" type="fill" clip_to_extent="1" frame_rate="10" name="" is_animated="0">
        <data_defined_properties>
          <Option type="Map">
            <Option value="" type="QString" name="name"/>
            <Option name="properties"/>
            <Option value="collection" type="QString" name="type"/>
          </Option>
        </data_defined_properties>
        <layer id="{6a4722c2-c3de-4beb-8f3a-9dfb46e29678}" class="SimpleFill" pass="0" locked="0" enabled="1">
          <Option type="Map">
            <Option value="3x:0,0,0,0,0,0" type="QString" name="border_width_map_unit_scale"/>
            <Option value="255,158,23,255,rgb:1,0.61960784313725492,0.09019607843137255,1" type="QString" name="color"/>
            <Option value="bevel" type="QString" name="joinstyle"/>
            <Option value="0,0" type="QString" name="offset"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="offset_map_unit_scale"/>
            <Option value="MM" type="QString" name="offset_unit"/>
            <Option value="182,113,16,255,rgb:0.71427481498435952,0.44252689402609291,0.06442359044785229,1" type="QString" name="outline_color"/>
            <Option value="solid" type="QString" name="outline_style"/>
            <Option value="0.2" type="QString" name="outline_width"/>
            <Option value="MM" type="QString" name="outline_width_unit"/>
            <Option value="solid" type="QString" name="style"/>
          </Option>
          <data_defined_properties>
            <Option type="Map">
              <Option value="" type="QString" name="name"/>
              <Option name="properties"/>
              <Option value="collection" type="QString" name="type"/>
            </Option>
          </data_defined_properties>
        </layer>
      </symbol>
    </profileFillSymbol>
    <profileMarkerSymbol>
      <symbol force_rhr="0" alpha="1" type="marker" clip_to_extent="1" frame_rate="10" name="" is_animated="0">
        <data_defined_properties>
          <Option type="Map">
            <Option value="" type="QString" name="name"/>
            <Option name="properties"/>
            <Option value="collection" type="QString" name="type"/>
          </Option>
        </data_defined_properties>
        <layer id="{a75f923a-cc49-4afb-be1a-d988bbf39235}" class="SimpleMarker" pass="0" locked="0" enabled="1">
          <Option type="Map">
            <Option value="0" type="QString" name="angle"/>
            <Option value="square" type="QString" name="cap_style"/>
            <Option value="255,158,23,255,rgb:1,0.61960784313725492,0.09019607843137255,1" type="QString" name="color"/>
            <Option value="1" type="QString" name="horizontal_anchor_point"/>
            <Option value="bevel" type="QString" name="joinstyle"/>
            <Option value="diamond" type="QString" name="name"/>
            <Option value="0,0" type="QString" name="offset"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="offset_map_unit_scale"/>
            <Option value="MM" type="QString" name="offset_unit"/>
            <Option value="182,113,16,255,rgb:0.71427481498435952,0.44252689402609291,0.06442359044785229,1" type="QString" name="outline_color"/>
            <Option value="solid" type="QString" name="outline_style"/>
            <Option value="0.2" type="QString" name="outline_width"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="outline_width_map_unit_scale"/>
            <Option value="MM" type="QString" name="outline_width_unit"/>
            <Option value="diameter" type="QString" name="scale_method"/>
            <Option value="3" type="QString" name="size"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="size_map_unit_scale"/>
            <Option value="MM" type="QString" name="size_unit"/>
            <Option value="1" type="QString" name="vertical_anchor_point"/>
          </Option>
          <data_defined_properties>
            <Option type="Map">
              <Option value="" type="QString" name="name"/>
              <Option name="properties"/>
              <Option value="collection" type="QString" name="type"/>
            </Option>
          </data_defined_properties>
        </layer>
      </symbol>
    </profileMarkerSymbol>
  </elevation>
  <renderer-v2 symbollevels="0" forceraster="0" type="singleSymbol" enableorderby="0" referencescale="-1">
    <symbols>
      <symbol force_rhr="0" alpha="1" type="line" clip_to_extent="1" frame_rate="10" name="0" is_animated="0">
        <data_defined_properties>
          <Option type="Map">
            <Option value="" type="QString" name="name"/>
            <Option name="properties"/>
            <Option value="collection" type="QString" name="type"/>
          </Option>
        </data_defined_properties>
        <layer id="{99045118-e096-4789-bbe8-4c602124714e}" class="GeometryGenerator" pass="0" locked="0" enabled="1">
          <Option type="Map">
            <Option value="Marker" type="QString" name="SymbolType"/>
            <Option value="centroid($geometry)" type="QString" name="geometryModifier"/>
            <Option value="MapUnit" type="QString" name="units"/>
          </Option>
          <data_defined_properties>
            <Option type="Map">
              <Option value="" type="QString" name="name"/>
              <Option name="properties"/>
              <Option value="collection" type="QString" name="type"/>
            </Option>
          </data_defined_properties>
          <symbol force_rhr="0" alpha="1" type="marker" clip_to_extent="1" frame_rate="10" name="@0@0" is_animated="0">
            <data_defined_properties>
              <Option type="Map">
                <Option value="" type="QString" name="name"/>
                <Option name="properties"/>
                <Option value="collection" type="QString" name="type"/>
              </Option>
            </data_defined_properties>
            <layer id="{3edd14f7-eb01-432a-9890-cc48134cc9ec}" class="SimpleMarker" pass="0" locked="0" enabled="1">
              <Option type="Map">
                <Option value="0" type="QString" name="angle"/>
                <Option value="square" type="QString" name="cap_style"/>
                <Option value="255,0,0,255,rgb:1,0,0,1" type="QString" name="color"/>
                <Option value="1" type="QString" name="horizontal_anchor_point"/>
                <Option value="bevel" type="QString" name="joinstyle"/>
                <Option value="line" type="QString" name="name"/>
                <Option value="0,0" type="QString" name="offset"/>
                <Option value="3x:0,0,0,0,0,0" type="QString" name="offset_map_unit_scale"/>
                <Option value="MM" type="QString" name="offset_unit"/>
                <Option value="35,35,35,255,rgb:0.13725490196078433,0.13725490196078433,0.13725490196078433,1" type="QString" name="outline_color"/>
                <Option value="solid" type="QString" name="outline_style"/>
                <Option value="0.4" type="QString" name="outline_width"/>
                <Option value="3x:0,0,0,0,0,0" type="QString" name="outline_width_map_unit_scale"/>
                <Option value="MM" type="QString" name="outline_width_unit"/>
                <Option value="diameter" type="QString" name="scale_method"/>
                <Option value="7" type="QString" name="size"/>
                <Option value="3x:0,0,0,0,0,0" type="QString" name="size_map_unit_scale"/>
                <Option value="MM" type="QString" name="size_unit"/>
                <Option value="1" type="QString" name="vertical_anchor_point"/>
              </Option>
              <data_defined_properties>
                <Option type="Map">
                  <Option value="" type="QString" name="name"/>
                  <Option type="Map" name="properties">
                    <Option type="Map" name="angle">
                      <Option value="true" type="bool" name="active"/>
                      <Option value="&quot;_Section_Dip&quot; - 90.0" type="QString" name="expression"/>
                      <Option value="3" type="int" name="type"/>
                    </Option>
                  </Option>
                  <Option value="collection" type="QString" name="type"/>
                </Option>
              </data_defined_properties>
            </layer>
          </symbol>
        </layer>
      </symbol>
    </symbols>
    <rotation/>
    <sizescale/>
  </renderer-v2>
  <selection mode="Default">
    <selectionColor invalid="1"/>
    <selectionSymbol>
      <symbol force_rhr="0" alpha="1" type="line" clip_to_extent="1" frame_rate="10" name="" is_animated="0">
        <data_defined_properties>
          <Option type="Map">
            <Option value="" type="QString" name="name"/>
            <Option name="properties"/>
            <Option value="collection" type="QString" name="type"/>
          </Option>
        </data_defined_properties>
        <layer id="{96b2f197-a33e-41d0-89f0-40377aad0949}" class="SimpleLine" pass="0" locked="0" enabled="1">
          <Option type="Map">
            <Option value="0" type="QString" name="align_dash_pattern"/>
            <Option value="square" type="QString" name="capstyle"/>
            <Option value="5;2" type="QString" name="customdash"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="customdash_map_unit_scale"/>
            <Option value="MM" type="QString" name="customdash_unit"/>
            <Option value="0" type="QString" name="dash_pattern_offset"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="dash_pattern_offset_map_unit_scale"/>
            <Option value="MM" type="QString" name="dash_pattern_offset_unit"/>
            <Option value="0" type="QString" name="draw_inside_polygon"/>
            <Option value="bevel" type="QString" name="joinstyle"/>
            <Option value="35,35,35,255,rgb:0.13725490196078433,0.13725490196078433,0.13725490196078433,1" type="QString" name="line_color"/>
            <Option value="solid" type="QString" name="line_style"/>
            <Option value="0.26" type="QString" name="line_width"/>
            <Option value="MM" type="QString" name="line_width_unit"/>
            <Option value="0" type="QString" name="offset"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="offset_map_unit_scale"/>
            <Option value="MM" type="QString" name="offset_unit"/>
            <Option value="0" type="QString" name="ring_filter"/>
            <Option value="0" type="QString" name="trim_distance_end"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="trim_distance_end_map_unit_scale"/>
            <Option value="MM" type="QString" name="trim_distance_end_unit"/>
            <Option value="0" type="QString" name="trim_distance_start"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="trim_distance_start_map_unit_scale"/>
            <Option value="MM" type="QString" name="trim_distance_start_unit"/>
            <Option value="0" type="QString" name="tweak_dash_pattern_on_corners"/>
            <Option value="0" type="QString" name="use_custom_dash"/>
            <Option value="3x:0,0,0,0,0,0" type="QString" name="width_map_unit_scale"/>
          </Option>
          <data_defined_properties>
            <Option type="Map">
              <Option value="" type="QString" name="name"/>
              <Option name="properties"/>
              <Option value="collection" type="QString" name="type"/>
            </Option>
          </data_defined_properties>
        </layer>
      </symbol>
    </selectionSymbol>
  </selection>
  <customproperties>
    <Option type="Map">
      <Option type="List" name="dualview/previewExpressions">
        <Option value="&quot;DataSet&quot;" type="QString"/>
      </Option>
      <Option value="0" type="int" name="embeddedWidgets/count"/>
      <Option name="variableNames"/>
      <Option name="variableValues"/>
    </Option>
  </customproperties>
  <blendMode>0</blendMode>
  <featureBlendMode>0</featureBlendMode>
  <layerOpacity>1</layerOpacity>
  <SingleCategoryDiagramRenderer attributeLegend="1" diagramType="Histogram">
    <DiagramCategory height="15" backgroundAlpha="255" showAxis="1" width="15" enabled="0" minimumSize="0" rotationOffset="270" barWidth="5" lineSizeScale="3x:0,0,0,0,0,0" sizeType="MM" sizeScale="3x:0,0,0,0,0,0" maxScaleDenominator="1e+08" spacingUnit="MM" diagramOrientation="Up" penAlpha="255" scaleBasedVisibility="0" direction="0" opacity="1" penWidth="0" minScaleDenominator="0" spacingUnitScale="3x:0,0,0,0,0,0" spacing="5" labelPlacementMethod="XHeight" scaleDependency="Area" backgroundColor="#ffffff" lineSizeType="MM" penColor="#000000">
      <fontProperties style="" description="Noto Sans,10,-1,0,50,0,0,0,0,0" bold="0" strikethrough="0" italic="0" underline="0"/>
      <axisSymbol>
        <symbol force_rhr="0" alpha="1" type="line" clip_to_extent="1" frame_rate="10" name="" is_animated="0">
          <data_defined_properties>
            <Option type="Map">
              <Option value="" type="QString" name="name"/>
              <Option name="properties"/>
              <Option value="collection" type="QString" name="type"/>
            </Option>
          </data_defined_properties>
          <layer id="{8280fb56-3a6f-4607-b929-dc0ca7dc050d}" class="SimpleLine" pass="0" locked="0" enabled="1">
            <Option type="Map">
              <Option value="0" type="QString" name="align_dash_pattern"/>
              <Option value="square" type="QString" name="capstyle"/>
              <Option value="5;2" type="QString" name="customdash"/>
              <Option value="3x:0,0,0,0,0,0" type="QString" name="customdash_map_unit_scale"/>
              <Option value="MM" type="QString" name="customdash_unit"/>
              <Option value="0" type="QString" name="dash_pattern_offset"/>
              <Option value="3x:0,0,0,0,0,0" type="QString" name="dash_pattern_offset_map_unit_scale"/>
              <Option value="MM" type="QString" name="dash_pattern_offset_unit"/>
              <Option value="0" type="QString" name="draw_inside_polygon"/>
              <Option value="bevel" type="QString" name="joinstyle"/>
              <Option value="35,35,35,255,rgb:0.13725490196078433,0.13725490196078433,0.13725490196078433,1" type="QString" name="line_color"/>
              <Option value="solid" type="QString" name="line_style"/>
              <Option value="0.26" type="QString" name="line_width"/>
              <Option value="MM" type="QString" name="line_width_unit"/>
              <Option value="0" type="QString" name="offset"/>
              <Option value="3x:0,0,0,0,0,0" type="QString" name="offset_map_unit_scale"/>
              <Option value="MM" type="QString" name="offset_unit"/>
              <Option value="0" type="QString" name="ring_filter"/>
              <Option value="0" type="QString" name="trim_distance_end"/>
              <Option value="3x:0,0,0,0,0,0" type="QString" name="trim_distance_end_map_unit_scale"/>
              <Option value="MM" type="QString" name="trim_distance_end_unit"/>
              <Option value="0" type="QString" name="trim_distance_start"/>
              <Option value="3x:0,0,0,0,0,0" type="QString" name="trim_distance_start_map_unit_scale"/>
              <Option value="MM" type="QString" name="trim_distance_start_unit"/>
              <Option value="0" type="QString" name="tweak_dash_pattern_on_corners"/>
              <Option value="0" type="QString" name="use_custom_dash"/>
              <Option value="3x:0,0,0,0,0,0" type="QString" name="width_map_unit_scale"/>
            </Option>
            <data_defined_properties>
              <Option type="Map">
                <Option value="" type="QString" name="name"/>
                <Option name="properties"/>
                <Option value="collection" type="QString" name="type"/>
              </Option>
            </data_defined_properties>
          </layer>
        </symbol>
      </axisSymbol>
    </DiagramCategory>
  </SingleCategoryDiagramRenderer>
  <DiagramLayerSettings priority="0" dist="0" linePlacementFlags="18" obstacle="0" showAll="1" placement="2" zIndex="0">
    <properties>
      <Option type="Map">
        <Option value="" type="QString" name="name"/>
        <Option name="properties"/>
        <Option value="collection" type="QString" name="type"/>
      </Option>
    </properties>
  </DiagramLayerSettings>
  <geometryOptions removeDuplicateNodes="0" geometryPrecision="0">
    <activeChecks/>
    <checkConfiguration/>
  </geometryOptions>
  <legend type="default-vector" showLabelLegend="0"/>
  <referencedLayers/>
  <fieldConfiguration>
    <field configurationFlags="NoFlag" name="fid">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="DataSet">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Hole_ID">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Depth">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Depth_To">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Point_Data">
      <editWidget type="Range">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Structure_Type">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Structure_Int">
      <editWidget type="Range">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Structure_Angle_TCA">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Structure2_Type">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Structure2_Int">
      <editWidget type="Range">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Structure2_Angle_TCA">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Linear_Structure_Type">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Linear_Structure_Int">
      <editWidget type="Range">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Linear_Structure_Angle_TCA">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Reference_Line">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Alpha">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Beta">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Gamma">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Computed_Plane_Dip">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Computed_Plane_Dip_Direction">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Computed_Line_Plunge">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Computed_Line_Azimuth">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Relog">
      <editWidget type="Range">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Comments">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Mark_Quality">
      <editWidget type="Range">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Line_Quality">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Logged_By">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="Logged_Date">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="_Depth_x">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="_Depth_y">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="_Depth_z">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="_DipDir">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="_Dip">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
    <field configurationFlags="NoFlag" name="_Section_Dip">
      <editWidget type="TextEdit">
        <config>
          <Option/>
        </config>
      </editWidget>
    </field>
  </fieldConfiguration>
  <aliases>
    <alias field="fid" index="0" name=""/>
    <alias field="DataSet" index="1" name=""/>
    <alias field="Hole_ID" index="2" name=""/>
    <alias field="Depth" index="3" name=""/>
    <alias field="Depth_To" index="4" name=""/>
    <alias field="Point_Data" index="5" name=""/>
    <alias field="Structure_Type" index="6" name=""/>
    <alias field="Structure_Int" index="7" name=""/>
    <alias field="Structure_Angle_TCA" index="8" name=""/>
    <alias field="Structure2_Type" index="9" name=""/>
    <alias field="Structure2_Int" index="10" name=""/>
    <alias field="Structure2_Angle_TCA" index="11" name=""/>
    <alias field="Linear_Structure_Type" index="12" name=""/>
    <alias field="Linear_Structure_Int" index="13" name=""/>
    <alias field="Linear_Structure_Angle_TCA" index="14" name=""/>
    <alias field="Reference_Line" index="15" name=""/>
    <alias field="Alpha" index="16" name=""/>
    <alias field="Beta" index="17" name=""/>
    <alias field="Gamma" index="18" name=""/>
    <alias field="Computed_Plane_Dip" index="19" name=""/>
    <alias field="Computed_Plane_Dip_Direction" index="20" name=""/>
    <alias field="Computed_Line_Plunge" index="21" name=""/>
    <alias field="Computed_Line_Azimuth" index="22" name=""/>
    <alias field="Relog" index="23" name=""/>
    <alias field="Comments" index="24" name=""/>
    <alias field="Mark_Quality" index="25" name=""/>
    <alias field="Line_Quality" index="26" name=""/>
    <alias field="Logged_By" index="27" name=""/>
    <alias field="Logged_Date" index="28" name=""/>
    <alias field="_Depth_x" index="29" name=""/>
    <alias field="_Depth_y" index="30" name=""/>
    <alias field="_Depth_z" index="31" name=""/>
    <alias field="_DipDir" index="32" name=""/>
    <alias field="_Dip" index="33" name=""/>
    <alias field="_Section_Dip" index="34" name=""/>
  </aliases>
  <splitPolicies>
    <policy policy="Duplicate" field="fid"/>
    <policy policy="Duplicate" field="DataSet"/>
    <policy policy="Duplicate" field="Hole_ID"/>
    <policy policy="Duplicate" field="Depth"/>
    <policy policy="Duplicate" field="Depth_To"/>
    <policy policy="Duplicate" field="Point_Data"/>
    <policy policy="Duplicate" field="Structure_Type"/>
    <policy policy="Duplicate" field="Structure_Int"/>
    <policy policy="Duplicate" field="Structure_Angle_TCA"/>
    <policy policy="Duplicate" field="Structure2_Type"/>
    <policy policy="Duplicate" field="Structure2_Int"/>
    <policy policy="Duplicate" field="Structure2_Angle_TCA"/>
    <policy policy="Duplicate" field="Linear_Structure_Type"/>
    <policy policy="Duplicate" field="Linear_Structure_Int"/>
    <policy policy="Duplicate" field="Linear_Structure_Angle_TCA"/>
    <policy policy="Duplicate" field="Reference_Line"/>
    <policy policy="Duplicate" field="Alpha"/>
    <policy policy="Duplicate" field="Beta"/>
    <policy policy="Duplicate" field="Gamma"/>
    <policy policy="Duplicate" field="Computed_Plane_Dip"/>
    <policy policy="Duplicate" field="Computed_Plane_Dip_Direction"/>
    <policy policy="Duplicate" field="Computed_Line_Plunge"/>
    <policy policy="Duplicate" field="Computed_Line_Azimuth"/>
    <policy policy="Duplicate" field="Relog"/>
    <policy policy="Duplicate" field="Comments"/>
    <policy policy="Duplicate" field="Mark_Quality"/>
    <policy policy="Duplicate" field="Line_Quality"/>
    <policy policy="Duplicate" field="Logged_By"/>
    <policy policy="Duplicate" field="Logged_Date"/>
    <policy policy="Duplicate" field="_Depth_x"/>
    <policy policy="Duplicate" field="_Depth_y"/>
    <policy policy="Duplicate" field="_Depth_z"/>
    <policy policy="Duplicate" field="_DipDir"/>
    <policy policy="Duplicate" field="_Dip"/>
    <policy policy="Duplicate" field="_Section_Dip"/>
  </splitPolicies>
  <defaults>
    <default applyOnUpdate="0" field="fid" expression=""/>
    <default applyOnUpdate="0" field="DataSet" expression=""/>
    <default applyOnUpdate="0" field="Hole_ID" expression=""/>
    <default applyOnUpdate="0" field="Depth" expression=""/>
    <default applyOnUpdate="0" field="Depth_To" expression=""/>
    <default applyOnUpdate="0" field="Point_Data" expression=""/>
    <default applyOnUpdate="0" field="Structure_Type" expression=""/>
    <default applyOnUpdate="0" field="Structure_Int" expression=""/>
    <default applyOnUpdate="0" field="Structure_Angle_TCA" expression=""/>
    <default applyOnUpdate="0" field="Structure2_Type" expression=""/>
    <default applyOnUpdate="0" field="Structure2_Int" expression=""/>
    <default applyOnUpdate="0" field="Structure2_Angle_TCA" expression=""/>
    <default applyOnUpdate="0" field="Linear_Structure_Type" expression=""/>
    <default applyOnUpdate="0" field="Linear_Structure_Int" expression=""/>
    <default applyOnUpdate="0" field="Linear_Structure_Angle_TCA" expression=""/>
    <default applyOnUpdate="0" field="Reference_Line" expression=""/>
    <default applyOnUpdate="0" field="Alpha" expression=""/>
    <default applyOnUpdate="0" field="Beta" expression=""/>
    <default applyOnUpdate="0" field="Gamma" expression=""/>
    <default applyOnUpdate="0" field="Computed_Plane_Dip" expression=""/>
    <default applyOnUpdate="0" field="Computed_Plane_Dip_Direction" expression=""/>
    <default applyOnUpdate="0" field="Computed_Line_Plunge" expression=""/>
    <default applyOnUpdate="0" field="Computed_Line_Azimuth" expression=""/>
    <default applyOnUpdate="0" field="Relog" expression=""/>
    <default applyOnUpdate="0" field="Comments" expression=""/>
    <default applyOnUpdate="0" field="Mark_Quality" expression=""/>
    <default applyOnUpdate="0" field="Line_Quality" expression=""/>
    <default applyOnUpdate="0" field="Logged_By" expression=""/>
    <default applyOnUpdate="0" field="Logged_Date" expression=""/>
    <default applyOnUpdate="0" field="_Depth_x" expression=""/>
    <default applyOnUpdate="0" field="_Depth_y" expression=""/>
    <default applyOnUpdate="0" field="_Depth_z" expression=""/>
    <default applyOnUpdate="0" field="_DipDir" expression=""/>
    <default applyOnUpdate="0" field="_Dip" expression=""/>
    <default applyOnUpdate="0" field="_Section_Dip" expression=""/>
  </defaults>
  <constraints>
    <constraint unique_strength="1" field="fid" exp_strength="0" notnull_strength="1" constraints="3"/>
    <constraint unique_strength="0" field="DataSet" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Hole_ID" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Depth" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Depth_To" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Point_Data" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Structure_Type" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Structure_Int" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Structure_Angle_TCA" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Structure2_Type" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Structure2_Int" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Structure2_Angle_TCA" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Linear_Structure_Type" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Linear_Structure_Int" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Linear_Structure_Angle_TCA" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Reference_Line" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Alpha" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Beta" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Gamma" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Computed_Plane_Dip" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Computed_Plane_Dip_Direction" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Computed_Line_Plunge" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Computed_Line_Azimuth" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Relog" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Comments" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Mark_Quality" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Line_Quality" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Logged_By" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="Logged_Date" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="_Depth_x" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="_Depth_y" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="_Depth_z" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="_DipDir" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="_Dip" exp_strength="0" notnull_strength="0" constraints="0"/>
    <constraint unique_strength="0" field="_Section_Dip" exp_strength="0" notnull_strength="0" constraints="0"/>
  </constraints>
  <constraintExpressions>
    <constraint exp="" field="fid" desc=""/>
    <constraint exp="" field="DataSet" desc=""/>
    <constraint exp="" field="Hole_ID" desc=""/>
    <constraint exp="" field="Depth" desc=""/>
    <constraint exp="" field="Depth_To" desc=""/>
    <constraint exp="" field="Point_Data" desc=""/>
    <constraint exp="" field="Structure_Type" desc=""/>
    <constraint exp="" field="Structure_Int" desc=""/>
    <constraint exp="" field="Structure_Angle_TCA" desc=""/>
    <constraint exp="" field="Structure2_Type" desc=""/>
    <constraint exp="" field="Structure2_Int" desc=""/>
    <constraint exp="" field="Structure2_Angle_TCA" desc=""/>
    <constraint exp="" field="Linear_Structure_Type" desc=""/>
    <constraint exp="" field="Linear_Structure_Int" desc=""/>
    <constraint exp="" field="Linear_Structure_Angle_TCA" desc=""/>
    <constraint exp="" field="Reference_Line" desc=""/>
    <constraint exp="" field="Alpha" desc=""/>
    <constraint exp="" field="Beta" desc=""/>
    <constraint exp="" field="Gamma" desc=""/>
    <constraint exp="" field="Computed_Plane_Dip" desc=""/>
    <constraint exp="" field="Computed_Plane_Dip_Direction" desc=""/>
    <constraint exp="" field="Computed_Line_Plunge" desc=""/>
    <constraint exp="" field="Computed_Line_Azimuth" desc=""/>
    <constraint exp="" field="Relog" desc=""/>
    <constraint exp="" field="Comments" desc=""/>
    <constraint exp="" field="Mark_Quality" desc=""/>
    <constraint exp="" field="Line_Quality" desc=""/>
    <constraint exp="" field="Logged_By" desc=""/>
    <constraint exp="" field="Logged_Date" desc=""/>
    <constraint exp="" field="_Depth_x" desc=""/>
    <constraint exp="" field="_Depth_y" desc=""/>
    <constraint exp="" field="_Depth_z" desc=""/>
    <constraint exp="" field="_DipDir" desc=""/>
    <constraint exp="" field="_Dip" desc=""/>
    <constraint exp="" field="_Section_Dip" desc=""/>
  </constraintExpressions>
  <expressionfields/>
  <attributeactions>
    <defaultAction value="{00000000-0000-0000-0000-000000000000}" key="Canvas"/>
  </attributeactions>
  <attributetableconfig sortExpression="" actionWidgetStyle="dropDown" sortOrder="0">
    <columns>
      <column type="field" hidden="0" name="fid" width="-1"/>
      <column type="field" hidden="0" name="DataSet" width="-1"/>
      <column type="field" hidden="0" name="Hole_ID" width="-1"/>
      <column type="field" hidden="0" name="Depth" width="-1"/>
      <column type="field" hidden="0" name="Depth_To" width="-1"/>
      <column type="field" hidden="0" name="Point_Data" width="-1"/>
      <column type="field" hidden="0" name="Structure_Type" width="-1"/>
      <column type="field" hidden="0" name="Structure_Int" width="-1"/>
      <column type="field" hidden="0" name="Structure_Angle_TCA" width="-1"/>
      <column type="field" hidden="0" name="Structure2_Type" width="-1"/>
      <column type="field" hidden="0" name="Structure2_Int" width="-1"/>
      <column type="field" hidden="0" name="Structure2_Angle_TCA" width="-1"/>
      <column type="field" hidden="0" name="Linear_Structure_Type" width="-1"/>
      <column type="field" hidden="0" name="Linear_Structure_Int" width="-1"/>
      <column type="field" hidden="0" name="Linear_Structure_Angle_TCA" width="-1"/>
      <column type="field" hidden="0" name="Reference_Line" width="-1"/>
      <column type="field" hidden="0" name="Alpha" width="-1"/>
      <column type="field" hidden="0" name="Beta" width="-1"/>
      <column type="field" hidden="0" name="Gamma" width="-1"/>
      <column type="field" hidden="0" name="Computed_Plane_Dip" width="-1"/>
      <column type="field" hidden="0" name="Computed_Plane_Dip_Direction" width="-1"/>
      <column type="field" hidden="0" name="Computed_Line_Plunge" width="-1"/>
      <column type="field" hidden="0" name="Computed_Line_Azimuth" width="-1"/>
      <column type="field" hidden="0" name="Relog" width="-1"/>
      <column type="field" hidden="0" name="Comments" width="-1"/>
      <column type="field" hidden="0" name="Mark_Quality" width="-1"/>
      <column type="field" hidden="0" name="Line_Quality" width="-1"/>
      <column type="field" hidden="0" name="Logged_By" width="-1"/>
      <column type="field" hidden="0" name="Logged_Date" width="-1"/>
      <column type="field" hidden="0" name="_Depth_x" width="-1"/>
      <column type="field" hidden="0" name="_Depth_y" width="-1"/>
      <column type="field" hidden="0" name="_Depth_z" width="-1"/>
      <column type="field" hidden="0" name="_DipDir" width="-1"/>
      <column type="field" hidden="0" name="_Dip" width="-1"/>
      <column type="field" hidden="0" name="_Section_Dip" width="-1"/>
      <column type="actions" hidden="1" width="-1"/>
    </columns>
  </attributetableconfig>
  <conditionalstyles>
    <rowstyles/>
    <fieldstyles/>
  </conditionalstyles>
  <storedexpressions/>
  <editform tolerant="1"></editform>
  <editforminit/>
  <editforminitcodesource>0</editforminitcodesource>
  <editforminitfilepath></editforminitfilepath>
  <editforminitcode><![CDATA[# -*- coding: utf-8 -*-
"""
QGIS forms can have a Python function that is called when the form is
opened.

Use this function to add extra logic to your forms.

Enter the name of the function in the "Python Init function"
field.
An example follows:
"""
from qgis.PyQt.QtWidgets import QWidget

def my_form_open(dialog, layer, feature):
    geom = feature.geometry()
    control = dialog.findChild(QWidget, "MyLineEdit")
]]></editforminitcode>
  <featformsuppress>0</featformsuppress>
  <editorlayout>generatedlayout</editorlayout>
  <editable>
    <field editable="1" name="Alpha"/>
    <field editable="1" name="Beta"/>
    <field editable="1" name="Comments"/>
    <field editable="1" name="Computed_Line_Azimuth"/>
    <field editable="1" name="Computed_Line_Plunge"/>
    <field editable="1" name="Computed_Plane_Dip"/>
    <field editable="1" name="Computed_Plane_Dip_Direction"/>
    <field editable="1" name="DataSet"/>
    <field editable="1" name="Depth"/>
    <field editable="1" name="Depth_To"/>
    <field editable="1" name="Gamma"/>
    <field editable="1" name="Hole_ID"/>
    <field editable="1" name="Line_Quality"/>
    <field editable="1" name="Linear_Structure_Angle_TCA"/>
    <field editable="1" name="Linear_Structure_Int"/>
    <field editable="1" name="Linear_Structure_Type"/>
    <field editable="1" name="Logged_By"/>
    <field editable="1" name="Logged_Date"/>
    <field editable="1" name="Mark_Quality"/>
    <field editable="1" name="Point_Data"/>
    <field editable="1" name="Reference_Line"/>
    <field editable="1" name="Relog"/>
    <field editable="1" name="Structure2_Angle_TCA"/>
    <field editable="1" name="Structure2_Int"/>
    <field editable="1" name="Structure2_Type"/>
    <field editable="1" name="Structure_Angle_TCA"/>
    <field editable="1" name="Structure_Int"/>
    <field editable="1" name="Structure_Type"/>
    <field editable="1" name="_Depth_x"/>
    <field editable="1" name="_Depth_y"/>
    <field editable="1" name="_Depth_z"/>
    <field editable="1" name="_Dip"/>
    <field editable="1" name="_DipDir"/>
    <field editable="1" name="_Section_Dip"/>
    <field editable="1" name="fid"/>
  </editable>
  <labelOnTop>
    <field labelOnTop="0" name="Alpha"/>
    <field labelOnTop="0" name="Beta"/>
    <field labelOnTop="0" name="Comments"/>
    <field labelOnTop="0" name="Computed_Line_Azimuth"/>
    <field labelOnTop="0" name="Computed_Line_Plunge"/>
    <field labelOnTop="0" name="Computed_Plane_Dip"/>
    <field labelOnTop="0" name="Computed_Plane_Dip_Direction"/>
    <field labelOnTop="0" name="DataSet"/>
    <field labelOnTop="0" name="Depth"/>
    <field labelOnTop="0" name="Depth_To"/>
    <field labelOnTop="0" name="Gamma"/>
    <field labelOnTop="0" name="Hole_ID"/>
    <field labelOnTop="0" name="Line_Quality"/>
    <field labelOnTop="0" name="Linear_Structure_Angle_TCA"/>
    <field labelOnTop="0" name="Linear_Structure_Int"/>
    <field labelOnTop="0" name="Linear_Structure_Type"/>
    <field labelOnTop="0" name="Logged_By"/>
    <field labelOnTop="0" name="Logged_Date"/>
    <field labelOnTop="0" name="Mark_Quality"/>
    <field labelOnTop="0" name="Point_Data"/>
    <field labelOnTop="0" name="Reference_Line"/>
    <field labelOnTop="0" name="Relog"/>
    <field labelOnTop="0" name="Structure2_Angle_TCA"/>
    <field labelOnTop="0" name="Structure2_Int"/>
    <field labelOnTop="0" name="Structure2_Type"/>
    <field labelOnTop="0" name="Structure_Angle_TCA"/>
    <field labelOnTop="0" name="Structure_Int"/>
    <field labelOnTop="0" name="Structure_Type"/>
    <field labelOnTop="0" name="_Depth_x"/>
    <field labelOnTop="0" name="_Depth_y"/>
    <field labelOnTop="0" name="_Depth_z"/>
    <field labelOnTop="0" name="_Dip"/>
    <field labelOnTop="0" name="_DipDir"/>
    <field labelOnTop="0" name="_Section_Dip"/>
    <field labelOnTop="0" name="fid"/>
  </labelOnTop>
  <reuseLastValue>
    <field reuseLastValue="0" name="Alpha"/>
    <field reuseLastValue="0" name="Beta"/>
    <field reuseLastValue="0" name="Comments"/>
    <field reuseLastValue="0" name="Computed_Line_Azimuth"/>
    <field reuseLastValue="0" name="Computed_Line_Plunge"/>
    <field reuseLastValue="0" name="Computed_Plane_Dip"/>
    <field reuseLastValue="0" name="Computed_Plane_Dip_Direction"/>
    <field reuseLastValue="0" name="DataSet"/>
    <field reuseLastValue="0" name="Depth"/>
    <field reuseLastValue="0" name="Depth_To"/>
    <field reuseLastValue="0" name="Gamma"/>
    <field reuseLastValue="0" name="Hole_ID"/>
    <field reuseLastValue="0" name="Line_Quality"/>
    <field reuseLastValue="0" name="Linear_Structure_Angle_TCA"/>
    <field reuseLastValue="0" name="Linear_Structure_Int"/>
    <field reuseLastValue="0" name="Linear_Structure_Type"/>
    <field reuseLastValue="0" name="Logged_By"/>
    <field reuseLastValue="0" name="Logged_Date"/>
    <field reuseLastValue="0" name="Mark_Quality"/>
    <field reuseLastValue="0" name="Point_Data"/>
    <field reuseLastValue="0" name="Reference_Line"/>
    <field reuseLastValue="0" name="Relog"/>
    <field reuseLastValue="0" name="Structure2_Angle_TCA"/>
    <field reuseLastValue="0" name="Structure2_Int"/>
    <field reuseLastValue="0" name="Structure2_Type"/>
    <field reuseLastValue="0" name="Structure_Angle_TCA"/>
    <field reuseLastValue="0" name="Structure_Int"/>
    <field reuseLastValue="0" name="Structure_Type"/>
    <field reuseLastValue="0" name="_Depth_x"/>
    <field reuseLastValue="0" name="_Depth_y"/>
    <field reuseLastValue="0" name="_Depth_z"/>
    <field reuseLastValue="0" name="_Dip"/>
    <field reuseLastValue="0" name="_DipDir"/>
    <field reuseLastValue="0" name="_Section_Dip"/>
    <field reuseLastValue="0" name="fid"/>
  </reuseLastValue>
  <dataDefinedFieldProperties/>
  <widgets/>
  <previewExpression>"DataSet"</previewExpression>
  <mapTip enabled="1"></mapTip>
  <layerGeometryType>1</layerGeometryType>
</qgis>
